200M 400M 200M
RNG: 2.4 KM
BRG: 047°
ALT: 3,200 FT
SPD: 480 KTS
HDG: 012° N
TGT: ALPHA-7
MODE: SEARCH
PWR: NOMINAL
FREQ: X-BAND
STATUS: LOCK
NAVTGTWPNDEFRDRCOM
MIL-STD-1553IFF: ACTIVELINK-16: SYNC
SECTOR: ALPHA
THREAT: CLEAR
RADAR: ACTIVE
TRACK: 6 TGT
LAT 28.6213°N LON 77.3873°E
NX
Neometrix Target Acquired
GB Flag English
English Flag English
Indian Flag हिन्दी
Francis Flag Français
Dutch Flag Deutsch
Spanish Flag Español
Arabic Flag العربية
Russian Flag Русский
Japanese Flag 日本語
Portuges Flag Português
Italian Flag Italiano
Israel Flag עברית
Chinese Flag 中文
Korean Flag 한국어
Thailand Flag ไทย
Vietnamese Flag Tiếng Việt
Indonesia Flag Bahasa Indonesia
Malasia Flag Bahasa Melayu
Kiswahili Flag Kiswahili
Ethiopia Flag አማርኛ
isizulu Flag isiZulu
Hausa Flag Hausa
    Neometrix / Aircraft Ground Support Equipment / Helicopter Handling Dolly / NMX-HHD-116
    NMX-HHD-116 · ENGINEERED-TO-ORDER CLASS — DUTY · FRAME AND CRADLES · LIFT AND LOCK · WHEELS AND TOWBAR · STABILITY · BUILD · PROVE

    Helicopter Handling Dolly. Tall on small wheels.

    A helicopter with skids has no wheels of its own, so on the ground it rides on wheels that someone has to bring. Neometrix engineers the dolly that lifts it by its skids and carries it: the cradles, the lift, the lock, the wheels and the towbar.

    So the dolly has to know that a helicopter on a dolly is tall on small wheels, lift it only where its maker allows, and hold it by a lock, not by oil.

    A helicopter handling dolly on a plain white studio background: a low pale grey welded steel frame on four black wheels, two swivel castors and two fixed wheels, with a short pale grey towbar ending in a plain ring at the front, two parallel pale grey steel cradles on short bright steel lift posts, each with a dark rubber seat and a plain bright steel tube lying in it, and no people
    Fig · 01 — A helicopter handling dolly: a frame on wheels, two skid cradles with a pair of tubes standing in for the skids, lift cylinders and a towbar — illustrative render.
    The stability
    is the designthe track and the lift height set the slope and the turn
    The lift
    is by the skidsonly at the points the maker states
    The lock
    holds the loadsteel carries it, not oil
    The wheels
    are sized to the floorbrakes and chocks hold it still
    Status
    engineered to orderno delivery is claimed
    ISO 9001ISO 14001Lifting points and limits set by the helicopter's maker
    01
    Overview

    What a helicopter dolly has to get right, and what goes wrong when it does not.

    A dolly that lifts well and rolls well can still tip, because a helicopter raised on it is a tall mass on a small base.

    A skid cradle of a helicopter handling dolly on a plain white studio background: a pale grey steel channel with a smooth dark rubber seat along its length, a plain bright steel tube resting in the seat, a pale grey clamp strap over the tube held by two bolts, a short bright steel upright cylinder under one end, and no people
    Fig · 02 — A skid cradle: a channel with a rubber seat, a tube standing in for the skid, and a clamp over it — illustrative render.

    Tall on small wheels.

    What the dolly is for

    It moves a skid helicopter between its pad, its hangar and its workshop. It lifts both skids clear of the ground, carries the helicopter level, and sets it down again.

    Why a dolly and not wheels on the skids

    Ground-handling wheels clip onto the skids, so the helicopter has to be tilted to fit them, and they want flat firm ground. A dolly lifts the helicopter level, with no one pulling the tail down.

    Why the cradles

    The skid tubes are located and clamped in cradles at the lifting points the maker states, so that the load goes into the skid and not into the airframe.

    Why a lock

    Oil lifts and steel holds. The cylinders raise the load, but a mechanical lock carries it, so that a leaking seal cannot let the helicopter down.

    Why stability is the design

    A helicopter's centre of gravity is high, and raised on a dolly it is higher, over wheels that stand close together. It tips when its weight line leaves the wheels. So the track and the lift height set the slope the dolly can stand on.

    Why the turn matters

    Turning pushes the weight line sideways, and the harder the turn the further it goes. The speed at which a dolly can turn grows with the radius of the turn and falls as the centre of gravity rises.

    Why the wheels and the floor

    The whole weight goes into the floor through a few small patches. So the wheels are sized to what the floor will carry, and the brakes and chocks hold the dolly still while it is loaded and unloaded.

    Why a towbar that steers

    The towbar holds the dolly's heading and takes the pull of the tug. It has a limit on the angle it may be turned through, because a sharp angle at speed is a turn.

    Why a dolly is not another trolley

    It is not an aircraft towbar or tug, which move a wheeled aircraft by its nose gear, and not an engine trolley, which carries an engine. It lifts a skid helicopter by its skids and carries it.

    02
    The method

    Duty, frame and cradles, lift and lock, wheels and towbar, stability, build and prove.

    Six steps in a fixed order. The stability proof and the lock test are the two that a quick job skips.

    1 · Duty

    The helicopter types, their weights and centres of gravity, the lifting points the maker states, the floors, the slopes and the turns on the route, and how often it is used, are noted.

    2 · Frame and cradles

    A welded frame carries cradles that locate and clamp the skid tubes, so that the load goes into the skids at the points the maker allows.

    3 · Lift and lock

    Hydraulic cylinders raise the cradles, a hand pump or a power pack drives them, and a mechanical lock takes the load, so that a seal can leak and the helicopter stays up.

    4 · Wheels and towbar

    Castors and fixed wheels are sized to the floor, brakes and chocks hold them, and a towbar steers, so that the dolly goes where it is pointed and stays where it is parked.

    5 · Stability

    The track, the lift height and the centre of gravity are worked into a limit for the slope and for the turn. A tilt test with a test weight checks it, so that the limit is proved and not guessed.

    6 · Build and prove

    The dolly is built, a test weight is lifted, locked and moved, every lock and guard is tried, and the record goes with the dolly.

    Which fault, which safeguard

    What can go wrongWhy it happensWhat the dolly does about it
    The helicopter tips on a slopeits centre of gravity is high, it is raised high, and the track is narrowit is raised no higher than the job needs, the track is set by the stability proof, and the slope limit is stated and posted
    The helicopter tips in a turnthe dolly was towed too fast for the turna limit on the speed and on the towbar angle, set from the same proof, and stated to the tug driver
    A skid is damaged by the liftthe load was applied at the wrong point, or too sharplycradles at the maker's lifting points, with a seat that spreads the load, and a clamp that holds the tube without crushing it
    The helicopter settles while it is parkeda seal leaked and the oil let it downa mechanical lock that carries the load once it is raised, and a check that it is engaged before anyone works near
    The dolly wanders, or the helicopter rocksa wheel has play, a tyre is soft, or a castor huntsmatched wheels, a check of pressure and wear, and a brake on every wheel that carries load
    A wheel overloads the floorthe weight goes through a small contact patchwheels sized to the floor limit, and a spread of the load over every wheel
    The dolly rolls away while it is loadedthe brakes were not setbrakes and chocks, and an interlock that does not let the lift move until they are on
    Someone is hurt by the lifting framea hand is in a pinch point while the cradles riseguards at the pinch points, a control that must be held, a clear zone, and a procedure that says nobody reaches in while it moves

    The step people underrate is the stability proof. A dolly that was never worked out can lift and roll a helicopter, and still tip it the first time it meets a slope.

    03
    Work content

    What the dolly contains, element by element.

    Read it as a checklist: a dolly missing a row will still lift and roll a helicopter, but it will not do it safely on every floor.

    The lift and lock of a helicopter handling dolly on a plain white studio background: an upright pale grey hydraulic cylinder with a bright steel rod, beside it an upright pale grey steel bar with a row of square notches down one edge and a pivoting bright steel pawl that engages one notch, a flat pale grey base plate under both, and no people
    Fig · 03 — The lift and the lock: a cylinder raises the load, and a notched bar with a pawl carries it — illustrative render.
    ElementWhat it doesWhat matters
    Framecarries the helicoptera welded frame stiff enough that the cradles stay level under load, with a wide track
    Skid cradleslocate and clamp the skid tubescradles at the lifting points the maker states, with a seat that spreads the load and a clamp that holds the tube
    Lift cylindersraise the cradleshydraulic cylinders that lift both skids together, level, and no higher than the job needs
    Pump or power packdrives the lifta hand pump, or a power pack with a control that must be held, and a relief valve
    Mechanical lockcarries the loada notched bar and a pawl on every cylinder, so that the load is held by steel and not by oil
    Wheels and castorscarry the weight to the floorwheels sized to the floor limit, with castors that steer and fixed wheels that track
    Brakes and chockshold the dolly stilla brake on every wheel that carries load, and chocks for the slope
    Towbarsteers and takes the pulla towbar that holds the heading, with a limit on its angle and a lock for when it is stowed
    Lift stopslimit the heightstops that keep the lift no higher than the job needs, so that the centre of gravity stays as low as possible
    Stability proofsets the limitsa worked limit for the slope and the turn from the track, the lift height and the centre of gravity, and a tilt test with a test weight
    Guardsprotect peopleguards at the pinch points, a clear zone, and a control that must be held
    Testing & documentationprove the dolly firsta test weight lifted, locked and moved, every lock and guard tried, and a record the customer can inspect

    The elements that decide the result are the mechanical lock and the stability proof. The first keeps the helicopter up when a seal fails, and the second keeps it upright when the floor is not flat.

    Full specification — expand
    SystemA welded frame on castors and fixed wheels, with brakes and chocks; skid cradles that locate and clamp the skid tubes at the lifting points the helicopter's maker states; hydraulic lift cylinders with a hand pump or a power pack; a mechanical lock that carries the load once it is raised; a towbar that steers; a stability proof for the slope and the turn; guards at the pinch points; and a load test, a lock test and documentation before handover
    The One IdeaTall on small wheels.
    Why Stability Is The DesignA raised helicopter has a high centre of gravity over a narrow base, so it tips when its weight line leaves the wheels. The track and the lift height set the slope the dolly can stand on and the speed it can turn at
    Why A Mechanical LockOil lifts and steel holds. The load is carried by a mechanical lock, so that a leaking seal cannot let the helicopter down
    StandardsNo standard is quoted here. The lifting points and the limits come from the helicopter's maker and the customer, and approval of a dolly for a helicopter rests with the customer and the authority they name; none is claimed here. No certification or accreditation is claimed here
    ConfigurationsA hand-pumped dolly, a powered lift dolly, and a self-propelled dolly
    Scope BoundaryThis page is the helicopter handling dolly, which lifts a skid helicopter by its skids and carries it. It is not an aircraft towbar or tug, which moves a wheeled aircraft by its nose gear (see aircraft towbar and towbarless tug), not a hydraulic jacking system, which lifts heavy loads on jacks (see hydraulic jacking system) and not an engine installation trolley, which carries an engine (see aircraft engine installation and transport trolley). It does not certify a helicopter, and it does not replace the crew's own judgement
    StatusNeometrix engineers helicopter handling dollies to order, and no delivered helicopter handling dolly is claimed.
    04
    Configurations

    One method, three ways to build the dolly.

    The method, the lock and the stability proof are shared. What changes is how the dolly is lifted and how it is moved.

    Hand-pumped dolly

    Pump it up, tow it by tug

    For a helicopter unit with a tug: a frame on wheels, cradles, a hand pump that raises both cylinders together, a mechanical lock, and a towbar that a tug pulls.

    Powered lift dolly

    A button to lift, a lock to hold

    For a workshop that moves helicopters often: a power pack and a control that must be held, so that the lift is quick and level, with the same lock and the same lift stops.

    Self-propelled dolly

    One person, no tug

    For a hangar with tight floors: a drive wheel and a steering handle, so that one person can lift and move the helicopter, with a speed limit set by the same stability proof.

    And the part that is not equipment at all, yet decides all three: the lifting points. Where a helicopter may be lifted, and by how much, comes from its maker and the customer, not from the dolly.

    05
    The drawings

    A reference set, drawn as real CAD sheets.

    Two sheets of one reference configuration: the arrangement of a hand-pumped helicopter handling dolly with three details, and the sequence of a move with the curves that show why a helicopter on a dolly is tall on small wheels. They show the plan, the dolly lifted with its centre of gravity and weight line, the cradle in section, the lift and the lock, and the hydraulic circuit. They carry tags and letters only. Every weight, height, speed and slope is fixed by design for the customer's helicopters.

    Reference drawing sheet one, the arrangement and details of a hand-pumped helicopter handling dolly. A plan shows a frame with a towbar and eye at the front, two long cradles with a tube lying in each, four lift cylinders under the ends of the cradles, a hand pump between them, and two castors and two fixed wheels. A front elevation shows the dolly lifted: the wheels a track apart, the frame, the lift cylinders with their notched locks, the cradles and two tubes that stand in for the skids, the centre of gravity at a height above the ground, the weight line dropped from it, and the angle through which the dolly can be tilted before the weight line reaches a wheel. Detail A shows a cradle in section, with its channel, rubber seat, tube, clamp strap and bolts and the lift cylinder below. Detail B shows the lift cylinder and the lock, a notched bar with a pawl in a notch. Detail C shows the hydraulic circuit: a hand pump, a check valve, a relief valve, a lowering valve and the lift cylinders. An item list numbers eight parts. A title block stamped reference configuration, not for construction
    Fig · 04 — Sheet 01, the arrangement: a plan, the dolly lifted with its centre of gravity and weight line, the cradle in section, the lift and lock, and the hydraulic circuit. Reference configuration, letters only.
    Reference drawing sheet two, the sequence and the curves of a hand-pumped helicopter handling dolly. A sequence of boxes shows the steps of a move: brakes and chocks set, cradles under the skids with the clamps closed, both sides lifted together and level, locks engaged so that the load is on steel, brakes released, the dolly towed or driven within the limits, and the helicopter set down with the locks lifted first, with an interlock that lets the lift move only with the brakes on. Detail A is a computed plot of the slope limit against the height of the centre of gravity, across the dolly and along it: the limit falls as the centre rises and is smaller across the dolly. Detail B is a computed plot of the turn speed limit against the radius of the turn for a lowered and a raised centre: it grows with the square root of the radius and is lower when the centre is raised. Detail C is a computed plot of the front and rear shares of the weight against the position of the centre of gravity, with the band of the helicopters served. A title block stamped reference configuration, not for construction
    Fig · 05 — Sheet 02, the sequence and the curves: the steps of a move with its interlock, the slope limit, the turn limit and the wheel loads. Reference configuration, tags only.

    Every real dolly is drawn for its own helicopters, its own lifting points and its own floors. These sheets are the arrangement and the order of working that a project set starts from. Approval of any drawing rests with the customer and the authority they name; none is claimed here.

    06
    Where it is used

    Wherever a skid helicopter has to move on the ground, and nobody wants to find out where it tips.

    The common thread is an aircraft with no wheels, a floor that is not always flat, and a move that has to be safe every time.

    Helicopter units

    Where aircraft move between a pad, a hangar and a workshop every day, and the crew needs a dolly that works the same way each time.

    Maintenance workshops

    Where a helicopter has to be brought in, worked on and moved out again, and the floor has limits.

    Hangars with tight floors

    Where there is little room to turn, and a self-propelled dolly lets one person put an aircraft exactly where it belongs.

    Training establishments

    Where aircraft are moved by many hands, and a dolly with a lock and stated limits is safer than one that depends on habit.

    07
    Watch

    See it in motion.

    A short walkthrough video of the helicopter handling dolly.

    08
    FAQ

    Common questions.

    Longer answers, for readers who want the reasoning.

    Q · 01 What does a helicopter handling dolly actually do?
    It lets a helicopter with skids be moved on the ground without wheels of its own. The dolly is brought under the skids, cradles locate and clamp the skid tubes at the lifting points the maker states, and hydraulic cylinders raise both skids together until the helicopter is clear of the ground. A mechanical lock then takes the load, the brakes are released, and the dolly is towed or driven to where the helicopter is wanted. At the end the helicopter is set down, the clamps are opened and the dolly is rolled away. The dolly does not choose where it may lift or how high. That comes from the helicopter's maker and the customer, and the dolly is built, proved and recorded to carry it out.
    Q · 02 Why is a helicopter on a dolly tall on small wheels?
    Because a helicopter is built to stand on skids that are far apart, and a dolly puts it on wheels that are close together. Its centre of gravity is high even on the ground, and raising it on a dolly lifts it further. A tall mass on a narrow base tips when the line of its weight, dropped from the centre of gravity, falls outside the wheels. A slope moves that line sideways, and so does a turn, and the higher the centre, the less sideways movement it takes. So the track of the dolly and the lift height decide the slope it can stand on and the speed at which it can turn. That is why the dolly is designed from its stability outward, and why it is lifted no higher than the job needs.
    Q · 03 Why a mechanical lock as well as cylinders?
    Because oil is a good way to lift a load and a poor way to hold one. A seal can weep, a hose can fail, or a valve can be knocked, and any of them lets the load down slowly or fast. A notched bar and a pawl on each cylinder carry the load in steel once it is raised, so the cylinders only have to lift it. The pawl is engaged before anyone works near the helicopter, and the lift is lowered only by lifting the pawl first. A hand pump or a power pack can then be left alone while the dolly is moved. The lock test, in which a test weight is raised, locked and left, is part of the proof before the dolly is handed over.
    Q · 04 Why lift only at the points the maker states?
    Because the skids are part of the airframe's load path, and they are strong in some places and not in others. The helicopter's maker states where a skid may be lifted and clamped, and with what load, in the aircraft's own manual. A dolly that lifts anywhere else can bend a skid tube or load the airframe in a way it was not designed for. So the cradles are made to meet the lifting points of the helicopters the customer names, with a seat that spreads the load along the tube and a clamp that holds it without crushing it. Where a dolly must serve more than one type, the cradles are adjustable, and every setting is written down.
    Q · 05 Is this the same as a towbar, a jacking system or an engine trolley?
    No, and the differences are worth stating precisely. The aircraft towbar and towbarless tug page covers equipment that moves a wheeled aircraft by its nose gear. The hydraulic jacking system page covers the lifting of heavy loads on jacks. The aircraft engine installation and transport trolley page covers a trolley that carries an engine. This page is the dolly that lifts a skid helicopter by its skids and carries it. It does not replace any of them, and it does not claim what they claim a second time.
    Q · 06 Has Neometrix built one of these?
    We would rather answer this plainly than let a page imply otherwise. Neometrix engineers helicopter handling dollies to order, and no delivered helicopter handling dolly is claimed. What stands behind the offer is adjacent: the pages for the aircraft towbar and tug, the hydraulic jacking system and the engine installation trolley each describe wheeled or lifting equipment for aircraft ground support, and each states its own status. The hydraulic cylinders, the pump, the wheels and the brakes are catalogue items, bought in, not invented. What Neometrix engineers is the dolly around them: the frame and the cradles, the lock, the towbar, the stability proof, the guards and the load test. So the honest position is that the dolly is engineered to order, the neighbouring disciplines are in the building, and the first dolly of this exact kind will be built around the customer's own helicopters rather than taken off a shelf.
    Q · 07 Which standard applies, and what can the dolly not do?
    No standard is quoted on this page. The helicopter's maker states the lifting points and the limits in its own manual, and the customer states the floors, the slopes and the turns the dolly must serve. The dolly carries a helicopter and states its own limits for the slope and the turn. It does not certify a helicopter, it is not an aircraft tug and not a jack, and it does not replace the crew's own judgement about the ground in front of it. This page claims no certification or accreditation. No weight, height, speed, slope or time figure is printed here, and approval of a dolly for a helicopter rests with the customer and the authority they name; none is claimed here.
    Q · 08 What do you need from us to quote?
    Six things, and most of them describe your helicopters and your floors rather than the dolly. First, the helicopters: which types, their weights and where their maker allows them to be lifted. Second, the route: the floors, the slopes, the doors and the turns. Third, the moving: whether a tug is available, or one person must do it. Fourth, the lifting: by hand pump or by power. Fifth, the room: the space where the dolly is kept and the services there. Sixth, the record: whether a load test and a stability proof are needed. From that we come back with a dolly concept, a proving plan you can check, and a budgetary price.
    09
    Related

    The neighbouring pages, and how they differ from this one.

    Three neighbours: one moves wheeled aircraft, one lifts heavy loads on jacks, one carries an engine.

    Browse all Neometrix product lines.

    Get a quotation

    Tell us the helicopter,
    and the floor it moves on.

    The projects desk replies within two working days with a dolly concept, a proving plan you can check, and a budgetary quotation. Write to [email protected] or use the form.

    Enquire — helicopter handling dolly Capability sheet (PDF) +91 7777 876 876
    ISO 9001 / 14001 ENGINEERED-TO-ORDER CLASS — HELICOPTER HANDLING DOLLY DUTY · FRAME AND CRADLES · LIFT AND LOCK · WHEELS AND TOWBAR · STABILITY · BUILD · PROVE — TALL ON SMALL WHEELS. ENGINEERED IN NOIDA · INDIA

    Trending Products

    Share This Page

    Engineered To Standards Used In UK, NATO & U.S. Defence Procurement
    DEF STAN (UK MoD)
    NATO STANAG
    RTCA/EUROCAE DO-160
    MIL-SPEC / MIL-STD
    Address
    E-148, Sector-63, Noida, Delhi-NCR, India
    Phone
    Email
    Working Hours
    8:30 AM – 5:30 PM  ·  Mon – Sat
    move to top arrow