200M 400M 200M
RNG: 2.4 KM
BRG: 047°
ALT: 3,200 FT
SPD: 480 KTS
HDG: 012° N
TGT: ALPHA-7
MODE: SEARCH
PWR: NOMINAL
FREQ: X-BAND
STATUS: LOCK
NAVTGTWPNDEFRDRCOM
MIL-STD-1553IFF: ACTIVELINK-16: SYNC
SECTOR: ALPHA
THREAT: CLEAR
RADAR: ACTIVE
TRACK: 6 TGT
LAT 28.6213°N LON 77.3873°E
NX
Neometrix Target Acquired
GB Flag English
English Flag English
Indian Flag हिन्दी
Francis Flag Français
Dutch Flag Deutsch
Spanish Flag Español
Arabic Flag العربية
Russian Flag Русский
Japanese Flag 日本語
Portuges Flag Português
Italian Flag Italiano
Israel Flag עברית
Chinese Flag 中文
Korean Flag 한국어
Thailand Flag ไทย
Vietnamese Flag Tiếng Việt
Indonesia Flag Bahasa Indonesia
Malasia Flag Bahasa Melayu
Kiswahili Flag Kiswahili
Ethiopia Flag አማርኛ
isizulu Flag isiZulu
Hausa Flag Hausa
    Neometrix / Rotating Machinery Test Facilities / Rotor Spin Test Facility / NMX-RST-106
    NMX-RST-106 · ENGINEERED-TO-ORDER CLASS — DUTY · ROTOR AND SPINDLE · CHAMBER AND VACUUM · DRIVE AND OIL · CONTAINMENT AND CONTROL · BUILD · PROVE

    Rotor Spin Test Facility. Speed squares the energy.

    A rotor spin test facility spins a rotor to its working speed, and then past it, to prove that it holds. The rotor hangs on a spindle inside a heavy evacuated chamber, and a drive takes it up to speed while the instruments watch it. Neometrix engineers it as a facility: the chamber, the liner, the spindle, the drive, the vacuum, the oil, the trips and the proof.

    So the facility has to know that speed squares the energy, build the chamber for the energy at the top speed, and end the run on its own if anything drifts.

    A rotor spin test chamber installation on a plain white studio background: a heavy upright pale grey steel chamber with thick ribbed rings, a domed bolted lid and a short base, a tall steel pedestal frame on the lid carrying a large black vertical electric motor over a steel gearbox housing, and on the right a pale grey vacuum pump unit with a black motor joined to the chamber by a short bright steel pipe, and no people
    Fig · 01 — A rotor spin test chamber installation: a heavy chamber with a drive on its lid, and a vacuum pump unit joined to it by a short pipe — illustrative render.
    The speed
    sets the loadon a rotor it grows with the square of the speed
    The energy
    goes with the squareso a small overspeed adds a larger share
    The chamber
    holds the rotor, not the airevacuated, so the drive spins the rotor
    The liner
    keeps what lets gobuilt for the top speed, not the working speed
    Status
    engineered to orderno delivery is claimed
    ISO 9001ISO 1400114 CFR 33.27 reference for rotor overspeed in aircraft engines
    01
    Overview

    What a spin test has to get right, and what goes wrong when it does not.

    Because the speed is the easy part, and the energy is the part that decides.

    An open rotor spin chamber on a plain white studio background: a heavy upright pale grey steel chamber with thick ribbed rings and a bright steel inner liner ring at its open top, a pale grey steel hoist frame with two columns and a cross beam, a round domed steel lid hung from the beam on two short chains, a long thin bright steel spindle hanging from the middle of the lid, and a plain round bright steel disc with a thick rim and a central hub hanging from the spindle above the opening, and no people
    Fig · 02 — An open spin chamber: the lid lifted on a hoist frame with a spindle hanging from it, a plain round rotor disc on the spindle above the opening, and the bright steel inner liner ring inside the chamber — illustrative render.

    Speed squares the energy.

    What the facility is for

    It proves, before a rotor is used, that the rotor holds at its working speed and beyond. A turbine disc, a compressor disc, an impeller or a flywheel is spun in a chamber while its growth, its vibration and its life are watched. It finds out what the rotor can do on the ground, where a failure costs a rotor and not an engine.

    Why speed squares the energy

    The stored energy of a spinning rotor grows with the square of its speed, and so does the load that holds it together. A small overspeed therefore adds a larger share of energy than it adds speed. The chamber and its liner are built for the energy at the top speed of the test, never for the working speed.

    Why the chamber is evacuated

    In air, a fast rotor churns the air around it, which loads the drive and heats the rotor. In a vacuum that drag goes, and the drive spends its power on the rotor itself. Some rotors need a chosen chamber pressure rather than the hardest vacuum, so the pressure can be set.

    Why the rotor hangs on a flexible spindle

    The rotor hangs from a long, slender spindle that bends a little. The rotor can then find its own centre as it speeds up, the drive is kept apart from the rotor's unbalance, and the critical speeds are passed through rather than fought.

    What the tests are

    An overspeed proof holds the rotor above its working speed for a set time, and then looks for permanent growth. A burst test takes a rotor to failure on purpose, to learn its margin. A cyclic test takes the speed up and down again and again, to count how many starts and stops the rotor lasts.

    Why the liner matters

    If a rotor lets go, the pieces carry the whole stored energy. The chamber holds them, and an inner liner is built to take both the pieces and the spin they carry. The lid is part of that design, and it stays locked until the rotor has stopped.

    Why a person is never near

    A spinning rotor is not stopped by a fence. The chamber is closed and locked for the run, the operator works from a control room outside, and nobody stands near an open chamber with a rotor in it.

    Why a spin facility is not for every job

    It proves strength and life, not smooth running. Critical speeds and unbalance response are measured on a rotor dynamics rig, and balancing is done on a balancing machine. The duty states the rotor, the speeds and the list of tests, and the facility is built for that.

    02
    The method

    Duty, rotor and spindle, chamber and vacuum, drive and oil, containment and control, build and prove.

    Six steps in a fixed order. The containment and the trips are the two that a quick job skips.

    1 · Duty

    The rotors, their size and mass, the speeds, the tests, the runs in a day and the people who will run them are noted, with the room the facility goes in.

    2 · Rotor and spindle

    The spindle and the adaptors are matched to the rotor family, so that each rotor seats the same way every time, and the spindle is flexible enough to pass through its critical speeds.

    3 · Chamber and vacuum

    The chamber, the lid and the vacuum system are sized so that the drive can reach speed without fighting the air, and the chamber pressure can be set and watched.

    4 · Drive and oil

    The motor, the speed-up stage and the oil system are matched to the rotor's energy and to the ramp that each test needs, and the oil system ends the run if it fails.

    5 · Containment and control

    The liner, the lid lock, the vibration trip, the overspeed trip and the controller are built as one chain, and the trips do not depend on the controller.

    6 · Build and prove

    A proving rotor is spun in steps, every trip is tried one by one, and the interlocks are tested with the lid and the doors, and the record goes with the facility.

    Which fault, which safeguard

    What can go wrongWhy it happensWhat the facility does about it
    The rotor will not reach speedthe chamber is not evacuated enough, or the drive was sized for the rotor and not for the draga vacuum system sized to the chamber, a drive sized for the rotor and the drag together, and a chamber pressure that is watched
    The rotor runs hotair drag at speed turns power into heat in the rotora vacuum, and a chamber pressure that must be low enough before a run is allowed to start
    The vibration climbs near a critical speedthe rotor is out of balance, or the spindle is too stiffa flexible spindle, a ramp that goes through the critical speeds without lingering, and a vibration trip
    The rotor lets goa flaw, fatigue, or a burst test taken on purposea liner and a chamber built for the energy at the top speed, and a lid that stays locked until the rotor has stopped
    The spindle bearings are starved of oilthe oil pump or a filter fails at speedan oil system that is watched for pressure and level, and a trip that ends the run if it fails
    The vacuum is losta rotary seal wears, or the lid seal leaksa pressure check before and during the run, and a trip if the pressure rises
    The speed runs past its set valuea fault in the drive or in its controlan overspeed trip that works on its own, apart from the controller that sets the speed
    Someone is near the chamberthe lid is opened, or the room is entered, before the rotor has stoppeda lid lock and door interlocks tied to a speed signal, a control room outside, and a procedure that says nobody stands near an open chamber with a rotor in it

    The step people underrate is the independent trip. A facility looks the same whether its overspeed trip is a circuit of its own or a line of code in the controller.

    03
    Work content

    What the facility contains, element by element.

    Read it as a checklist: a facility missing a row will spin a rotor, but it will not end the run, or hold what lets go.

    The drive and vacuum end of a rotor spin test chamber installation on a plain white studio background: a pale grey steel chamber with a domed bolted lid, a steel pedestal frame on the lid carrying a large black vertical electric motor over a steel gearbox housing and a round guard, a bright steel vacuum pipe leading to a pale grey vacuum pump unit on a low frame, and beside it a pale grey oil skid with a black motor and pump joined to the lid by two black hoses, and no people
    Fig · 03 — The drive and vacuum end of the facility: the motor and gearbox housing on the lid, the vacuum pipe and pump unit, and the oil skid with its two hoses — illustrative render.
    ElementWhat it doesWhat matters
    Spin chamberholds the rotor in vacuuma heavy chamber with a lid, ports for the vacuum, the instruments and the spindle, and a seal that holds at the chosen pressure
    Containment linertakes what lets goan inner liner and outer rings built for the energy at the top speed, with a lid that is part of the same design
    Lid and hoistopen and close the chambera lid that is lifted clear for loading, locked for the run, and tied to the speed signal
    Spindle and adaptorshold the rotora long, flexible spindle and adaptors that seat each rotor the same way every time
    Drivetakes the rotor up to speeda motor and a speed-up stage, or an air turbine, with a ramp that suits the test: slow for a proof, quick for a cyclic run
    Vacuum systemremoves the airpumps, valves and a pressure measurement that hold the chamber at a set pressure and end the run if it rises
    Oil systemfeeds the spindle bearingspressure and level checks, clean oil, and a trip that ends the run if the oil fails
    Instrumentswatch the rotorspeed, vibration, temperature and, where needed, the growth of the rotor, measured without touching it
    Heaterwarms the rotor (option)for a heated spin, a heater in the chamber that brings the rotor to temperature before it goes to speed
    Control and tripsrun the test and end ita controller that holds the ramp, a vibration trip and an independent overspeed trip, and a record kept for every run
    Interlocks and roomkeep people cleara lid lock, door interlocks, warning lights and a control room outside
    Testing & documentationprove the facility firsta proving rotor spun in steps, every trip tried one by one, and a record the customer can inspect

    The elements that decide the result are the liner and the trips. The first holds what lets go, and the second makes sure the run ends before it does.

    Full specification — expand
    SystemA heavy spin chamber with a lid and a hoist; a containment liner; a long, flexible spindle with adaptors for each rotor; a drive; a vacuum system; an oil system for the spindle bearings; instruments for speed, vibration, temperature and growth; a controller with a vibration trip and an independent overspeed trip; interlocks; and a proving run, a trip check and documentation before handover
    The One IdeaSpeed squares the energy.
    Why Speed Squares The EnergyThe stored energy of a spinning rotor, and the load that holds it together, grow with the square of its speed, so a small overspeed adds a larger share of energy than it adds speed; the chamber and its liner are built for the energy at the top speed of the test, never for the working speed
    Why The Chamber Is EvacuatedIn air a fast rotor churns the air around it, which loads the drive and heats the rotor; in a vacuum that drag goes and the drive spends its power on the rotor, and the chamber pressure can be set where a rotor needs it
    Standards14 CFR 33.27 covers the overspeed margin of turbine, compressor, fan and turbine wheel rotors in aircraft engines. This page prints none of its requirements, and no edition year. Approval of a facility rests with the customer and the authority they name; none is claimed here
    ConfigurationsAn overspeed and burst facility, a cyclic fatigue facility, and a heated spin facility
    Scope BoundaryThis page is the rotor spin test facility, which proves that a rotor holds its speed and how long it lasts. It is not a rotor dynamics test facility, which measures critical speeds and unbalance response (see rotor dynamics test facility), not a balancing machine, which balances a rotor (see dynamic balancing machine) and not a lubrication system, which is the oil skid for a spin test facility (see suction lubrication system for a cyclic spin test facility). It does not certify a rotor, and it does not replace the operator's own judgement. No certification or accreditation is claimed here
    StatusNeometrix engineers rotor spin test facilities to order, and no delivered rotor spin test facility is claimed.
    04
    Configurations

    One method, three ways to build the facility.

    The method, the liner and the trips are shared. What changes is what the test must prove, how fast the drive must ramp, and whether the rotor is warm.

    Overspeed and burst facility

    A heavy chamber and a strong liner

    For proof and burst runs: a drive that takes the rotor up in steps, a liner built for the energy at burst speed, and instruments for the growth of the rotor, with each run a one-off.

    Cyclic fatigue facility

    A quick drive and a count

    For low-cycle fatigue: a drive that ramps up and down quickly, so that many starts and stops are run in a day, with a count of cycles and a trip on a change in growth or vibration.

    Heated spin facility

    A heater and a way to watch the rotor warm

    For rotors that run hot: a heater in the chamber, instruments that work warm, and a chamber pressure chosen with the customer, with the same liner and the same trips.

    And the part that is not equipment at all, yet decides all three: what the test must prove. It is taken from the customer's own rotor and its own rules, not from the facility.

    05
    The drawings

    A reference set, drawn as real CAD sheets.

    Two sheets of one reference configuration: the arrangement of a rotor spin test facility with three details, and its control and trip chain with the curve of stored energy against speed. They show the chamber and its liner, the spindle and the rotor, the drive and the vacuum, and why speed squares the energy. They carry tags and letters only. Every speed, energy, mass, pressure and size is fixed by design for the customer's duty.

    Reference drawing sheet one, the arrangement and details of a rotor spin test facility. A sectioned elevation shows a heavy spin chamber with outer rings and a containment liner, a lid with two lid locks, a flexible spindle hanging through the lid with a rotor disc on it, a drive on a pedestal above the lid, a vacuum pump joined by a pipe, an oil skid with its hose drawn dashed, and two instrument ports, with the diameter of the rotor and the height of the chamber marked by letters. Detail A shows the flexible spindle and the adaptor that seats the rotor. Detail B shows the liner in section, free to turn, with the outer rings behind it. Detail C shows the lid lock and the speed signal that releases it. An item list numbers ten parts. A title block stamped reference configuration, not for construction
    Fig · 04 — Sheet 01, the arrangement: the chamber in section with its liner and lid locks, the flexible spindle and the rotor, the drive, the vacuum pump and the oil skid, and three details. Reference configuration, letters only.
    Reference drawing sheet two, the control chain and the curve of a rotor spin test facility. A control chain shows a controller, a drive and a motor turning a rotor on its spindle in a chamber, with the controller's own speed feedback; an independent trip that takes its own speed sensor, a vibration probe, the chamber pressure and an oil sensor, and cuts the drive without asking the controller; and a lid lock released only on a standstill signal. Detail A is a computed curve of stored energy against speed: two equal steps of speed buy a small gain and then a large gain, and the marks for the working speed, a proof overspeed and a burst test show that the liner is sized for the energy at the burst speed. A table of what each step does, and a title block stamped reference configuration, not for construction
    Fig · 05 — Sheet 02, the control chain and the curve: the independent trip, the lid lock, and the stored energy against the speed. Reference configuration, tags only.

    Every real facility is drawn for its own rotors, its own speeds and its own room. These sheets are the arrangement and the order of working that a project set starts from. Approval of any drawing rests with the customer and the authority they name; none is claimed here.

    06
    Where it is used

    Wherever a rotor has to be proved first, and trusted afterwards.

    The common thread is a rotor that stores a great deal of energy, a failure that costs far more than the test, and a margin that has to be known and not guessed.

    Engine builders

    Where a turbine or compressor disc has to be proved at overspeed, and for its life, before it goes into an engine.

    Rotor makers

    Where discs, impellers and rotor assemblies are made, and a first article or a batch has to be proved at speed.

    Energy storage makers

    Where the rotor of a flywheel has to be spun up to its limit, and its margin known before it is put to work.

    Research laboratories

    Where a new material or a new shape is spun until it fails, to learn how much margin it really has.

    07
    Watch

    See it in motion.

    A short walkthrough video of the Rotor Spin Test Facility.

    08
    FAQ

    Common questions.

    Longer answers, for readers who want the reasoning.

    Q · 01 What does a rotor spin test facility actually do?
    It spins a rotor to its working speed, and then past it, to prove that the rotor holds and to learn how long it lasts. The rotor hangs on a flexible spindle inside a heavy chamber from which the air has been removed, and a drive takes it up to speed. Instruments watch its speed, its vibration, its temperature and, where needed, its growth. An overspeed proof holds the rotor above its working speed, a burst test takes it to failure on purpose, and a cyclic test takes the speed up and down again and again. The facility does not decide which tests a rotor needs. That comes from the customer's own rotor and rules, and the facility is built, proved and recorded to carry them out.
    Q · 02 Why does speed square the energy, and why does it matter for the chamber?
    Because the stored energy of a spinning rotor grows with the square of its speed, and so does the load that holds it together. A small overspeed therefore adds a larger share of energy than it adds speed, and a rotor that holds at its working speed may not hold a little above it. It matters for the chamber because the chamber and its liner have to hold what the rotor can release at the top speed of the test, which is higher than the working speed, and higher still for a burst test. So the liner is sized from the top speed and the heaviest rotor, not from the working speed, and the lid and the lock are part of the same design.
    Q · 03 Why a vacuum, and why a flexible spindle?
    Because in air a fast rotor churns the air around it. That loads the drive and heats the rotor, and a rotor that is heated by its own drag is not the rotor the test set out to prove. In a vacuum that drag goes, and the drive spends its power on the rotor. The chamber pressure can be set, because some rotors need a chosen pressure rather than the hardest vacuum. The spindle is long and slender so that it bends a little. The rotor can then find its own centre as it speeds up, the drive is kept apart from the rotor's unbalance, and the critical speeds are passed through quickly rather than fought.
    Q · 04 Why must the overspeed trip work apart from the controller?
    Because the controller is the thing that sets the speed. If a fault in the controller or the drive drives the speed past its set value, a trip that lives in the same controller goes with it. So the overspeed trip is a circuit of its own, with its own speed sensor, and it cuts the drive and closes the run without asking the controller. The vibration trip, the oil trip and the vacuum trip are built the same way. The trips are tried one by one at the build, and again after any change, and the record of those trials goes with the facility. This is the step a quick job skips, and it is the one that matters on the day something drifts.
    Q · 05 Is this the same as a rotor dynamics facility, a balancing machine or a lubrication system?
    No, and the differences are worth stating precisely. The rotor dynamics test facility page covers measuring the critical speeds and the unbalance response of rotor-bearing systems. The dynamic balancing machine page covers balancing a rotor. The suction lubrication system for a cyclic spin test facility page covers the oil skid that feeds the spindle bearings of such a facility. This page is the facility that proves a rotor holds its speed, and how long it lasts. It does not replace any of them, and it does not claim what they claim a second time.
    Q · 06 Has Neometrix built one of these?
    We would rather answer this plainly than let a page imply otherwise. Neometrix engineers rotor spin test facilities to order, and no delivered rotor spin test facility is claimed. What stands behind the offer is adjacent: Neometrix engineers a rotor dynamics test facility (see the rotor dynamics test facility page), a dynamic balancing machine (see the dynamic balancing machine page) and the suction lubrication system for a cyclic spin test facility (see the suction lubrication system for a cyclic spin test facility page). The chamber, the pumps, the motor, the bearings and the instruments are catalogue items, bought in, not invented. What Neometrix engineers is the facility around them: the matching of spindle, drive and chamber to the rotor, the liner, the trips, the interlocks and the proof. So the honest position is that the facility is engineered to order, the neighbouring disciplines are in the building, and the first facility of this exact kind will be built around the customer's own rotors rather than taken off a shelf.
    Q · 07 Which standard applies, and what can the facility not do?
    14 CFR 33.27 covers the overspeed margin of turbine, compressor, fan and turbine wheel rotors in aircraft engines. This page prints none of its requirements, and no edition year: those come from the rule and the authority the customer names. The facility proves that a rotor holds its speed and how long it lasts. It does not certify a rotor, it does not measure critical speeds or balance a rotor, and it does not replace the operator's own judgement about who is near the chamber and when. This page claims no certification or accreditation. No speed, energy, mass, pressure or time figure is printed here, and approval of a facility rests with the customer and the authority they name; none is claimed here.
    Q · 08 What do you need from us to quote?
    Six things, and most of them describe your rotors rather than the facility. First, the rotors: their size and mass, and how they are held. Second, the speeds: the working speed, and how far past it the tests must go. Third, the tests: proof, burst, cyclic or heated, and what must be measured. Fourth, the runs: how many in a day, and who will run them. Fifth, the room: what services it has, and what the floor can carry. Sixth, the record: whether a proving run and a test record are needed. From that we come back with a facility concept, a proving plan you can check, and a budgetary price.
    09
    Related

    The neighbouring pages, and how they differ from this one.

    Three neighbours: one measures rotor dynamics, one balances rotors, one is the oil skid for a spin facility.

    Browse all Neometrix product lines.

    Get a quotation

    Tell us the rotor,
    and the tests it must pass.

    The projects desk replies within two working days with a facility concept, a proving plan you can check, and a budgetary quotation. Write to [email protected] or use the form.

    Enquire — spin test facility Capability sheet (PDF) +91 7777 876 876
    ISO 9001 / 14001 ENGINEERED-TO-ORDER CLASS — ROTOR SPIN TEST FACILITY DUTY · ROTOR AND SPINDLE · CHAMBER AND VACUUM · DRIVE AND OIL · CONTAINMENT AND CONTROL · BUILD · PROVE — SPEED SQUARES THE ENERGY. ENGINEERED IN NOIDA · INDIA

    Trending Products

    Share This Page

    Engineered To Standards Used In UK, NATO & U.S. Defence Procurement
    DEF STAN (UK MoD)
    NATO STANAG
    RTCA/EUROCAE DO-160
    MIL-SPEC / MIL-STD
    Address
    E-148, Sector-63, Noida, Delhi-NCR, India
    Phone
    Email
    Working Hours
    8:30 AM – 5:30 PM  ·  Mon – Sat
    move to top arrow