200M 400M 200M
RNG: 2.4 KM
BRG: 047°
ALT: 3,200 FT
SPD: 480 KTS
HDG: 012° N
TGT: ALPHA-7
MODE: SEARCH
PWR: NOMINAL
FREQ: X-BAND
STATUS: LOCK
NAVTGTWPNDEFRDRCOM
MIL-STD-1553IFF: ACTIVELINK-16: SYNC
SECTOR: ALPHA
THREAT: CLEAR
RADAR: ACTIVE
TRACK: 6 TGT
LAT 28.6213°N LON 77.3873°E
NX
Neometrix Target Acquired
GB Flag English
English Flag English
Indian Flag हिन्दी
Francis Flag Français
Dutch Flag Deutsch
Spanish Flag Español
Arabic Flag العربية
Russian Flag Русский
Japanese Flag 日本語
Portuges Flag Português
Italian Flag Italiano
Israel Flag עברית
Chinese Flag 中文
Korean Flag 한국어
Thailand Flag ไทย
Vietnamese Flag Tiếng Việt
Indonesia Flag Bahasa Indonesia
Malasia Flag Bahasa Melayu
Kiswahili Flag Kiswahili
Ethiopia Flag አማርኛ
isizulu Flag isiZulu
Hausa Flag Hausa
    Neometrix / Flow Measurement & Calibration / Wind Simulator / NMX-WSM-119
    NMX-WSM-119 · ENGINEERED-TO-ORDER CLASS — DUTY · FAN ARRAY · FLOW CONDITIONER · CONTROL · PROTECTION · SURVEY · PROVE

    Wind Simulator. Wind is paid for by the cube.

    A wind simulator makes wind on demand, so that a mast, an instrument or a small aircraft can be tried in a gust without waiting for the weather. Neometrix engineers the simulator: an array of fans, a flow conditioner, the sensors and the control.

    So the simulator has to know that wind is paid for by the cube, a gust can only be as quick as the fans, and the even part of the jet is only its core.

    A wind simulator on a plain white studio background: a wide pale grey steel frame holding a grid of six round fans in two rows of three, each in a square pale grey housing with a plain wire guard, a slim pale grey mast on a round base plate standing a short way in front of it, and no people
    Fig · 01 — A wind simulator: a grid of fans on a frame, and a plain mast standing in for the test article — illustrative render.
    The power
    goes with the cubeof the wind speed
    The push
    goes with the squareof the wind speed
    The gust
    is as quick as the fanstheir rotors take time to change speed
    The jet
    is even only in its corethe test article sits where the air is even
    Status
    engineered to orderno delivery is claimed
    ISO 9001ISO 14001Speeds and gust profiles set by the test article and the customer
    01
    Overview

    What a wind simulator has to get right, and what goes wrong when it does not.

    A bank of fans can blow. Making wind that is the same each time, at the right speed and in the right place, is the harder job.

    The flow conditioner of a wind simulator on a plain white studio background: a square frame of pale grey steel holding a bright brushed aluminium honeycomb of hexagonal cells, with a fine wire mesh screen in a second thin frame a short way behind it, and no people
    Fig · 02 — The flow conditioner: a honeycomb and a screen in a frame, which straighten the jets and even the speed — illustrative render.

    Wind is paid for by the cube.

    What the simulator is for

    It makes wind for a test article that has to meet the weather: a mast, an antenna, an outdoor instrument or a small aircraft. The wind can be steady, or it can gust, and it is the same every time it is run.

    Why an array of fans

    Many small fans can be switched in groups, so the wind can be shaped across the jet and in time. One large fan has a heavy rotor and cannot change speed quickly, and it makes one wind for the whole jet.

    Wind is paid for by the cube

    The power in a stream through a given area goes with the cube of its speed. Doubling the wind takes eight times the power, so a little more wind costs a great deal more, and the supply has to be sized for the peak.

    Why the push grows with the square

    The push of wind on a body goes with the square of its speed. Half the wind is a quarter of the push. So a test article that was never going to see a high wind should not be asked to, and a ramp is kinder than a step.

    Why a gust has a speed limit

    A fan rotor has inertia, and it takes time to speed up or slow down. The gust that comes out is a smoothed copy of the gust that was asked for, and the faster the gust, the more of it is lost.

    Why the jet is even only in its core

    An open jet mixes with the still air around it, and the mixing eats in from the edges. The air in the middle stays even for a distance, and the test article has to sit in that core and not at the edge.

    Why a flow conditioner

    A fan throws its air with a twist, and a grid of fans makes a grid of jets. A honeycomb straightens the swirl and a screen evens the speed. Both cost some pressure, so they take some power.

    Why guards and restraints

    Wind can lift a light article and throw it, and a loose fixing can fly into the fans. So the fans are guarded, the article is restrained, and the door is interlocked with the drives.

    Why the sensors sit upstream

    A sensor behind the article reads the wake of the article. The wind that matters is the wind that arrives, so the sensors sit upstream, in the core, and are checked against a reference.

    02
    The method

    Duty, fan array, flow conditioner, control, protection, survey and proof.

    Six steps in a fixed order. The speed survey and the restraints are the two that a quick job skips.

    1 · Duty

    The test article and its size, the speeds and the gusts wanted, the space around it, the supply available, and the rules the test must meet, are noted.

    2 · Fan array

    Fans, motors and drives on a welded frame are sized so that the article gets its top speed from the power available, with the cube in mind.

    3 · Flow conditioner

    A honeycomb and screens at the outlet straighten the jets and even the speed, so that the test article sits in air that is the same across it.

    4 · Control

    A control shapes steady wind and gusts from recipes and closes the loop on upstream sensors, so that each run asks for what the fans can give.

    5 · Protection

    Guards, restraints, a fence and an interlocked door, with a ramp and a controlled run-down, mean that nothing is thrown into the fans.

    6 · Survey and proof

    The jet is mapped across the place where the article sits, the step response is measured, every guard and interlock is tried, and the record goes with the simulator.

    Which fault, which safeguard

    What can go wrongWhy it happensWhat the simulator does about it
    The wind is uneven across the articlethe jets from the fans have not mixed, or the article sits near the edge of the jeta flow conditioner at the outlet, the article placed in the core, and a speed survey before the campaign
    The gust is slower than the one asked forthe fan rotors cannot change speed that fasta command shaped to what the fans can do, light rotors, and a measured step response that is part of the record
    The air swirls past the articlethe fans throw their air with a twista honeycomb that straightens the flow, and a run of straight air before the article
    The article is overloadedthe push grows with the square of the speed and the peak was never planneda limit on the speed set from the article, a ramp in place of a step, and a hold at each stage
    The supply tripsevery fan starts at once, and the power goes with the cube of the speedstaggered starts, a supply sized for the peak, and a limit on the total
    The speed reading is wrongthe sensor sits in the wake of the article, or in the swirlsensors upstream and in the core, checked against a reference before each campaign
    Something is thrown into the fansthe article or a fixing comes loose in the windguards on the fans, restraints on the article, a fence, and an interlock on the door
    The room is loud and hotthe fans put their noise and the heat of their motors into the spaceducting, a sound enclosure, and an air path that cools the motors

    The step people underrate is the speed survey. A simulator that was never mapped can blow hard and gust well, and still give the article different wind at its top and its bottom.

    03
    Work content

    What the simulator contains, element by element.

    Read it as a checklist: a simulator missing a row will still blow, but it will not make the same wind twice.

    A fan unit of a wind simulator on a plain white studio background: a round axial fan with plain curved dark grey blades on a smooth hub inside a square pale grey housing with a plain wire guard, a plain pale grey drive cabinet beside it with a thick black cable running to the fan housing, and no people
    Fig · 03 — A fan unit: a fan in a square housing with its guard, and the drive cabinet that sets its speed — illustrative render.
    ElementWhat it doesWhat matters
    Fansmove the airaxial fans with light rotors, so that the speed can change quickly, grouped so that the wind can be shaped across the jet
    Array frameholds the fans in a grida stiff welded frame that keeps the fans in line and carries the thrust and the vibration
    Motors and drivesset the fan speedsa drive on every fan or group, with a ramp and a controlled run-down, and a supply sized for the peak
    Flow conditionerstraightens and evens the aira honeycomb and screens at the outlet, which take the swirl out and even the speed at some cost in pressure
    Test mountholds the articlea mount, or a turntable that turns the article to the wind, with restraints that hold it if the wind takes it
    Wind sensorsmeasure the wind that arrivessensors upstream of the article and in the core of the jet, checked against a reference
    Control and recipesshape steady wind and gustsrecipes for steady, gusting and stepped wind, with closed-loop control on the upstream sensors, and a limit on the speed
    Guards and fencekeep things out of the fansguards on every fan, a fence round the jet, and a door that stops the drives when it is opened
    Supplypowers the arraya supply sized for the peak, with staggered starts, because the power goes with the cube of the speed
    Ducting and enclosurecarry the air and the noisean inlet that feeds the fans evenly, and a sound enclosure where the space needs one
    Datamake every run repeatablea record of the recipe, the sensor readings and the speed of every fan group for every run
    Testing & documentationprove the simulator firsta speed survey of the jet, a step response, every guard and interlock tried, and a record the customer can inspect

    The elements that decide the result are the flow conditioner and the speed survey. The first makes the wind even, and the second proves that it is.

    Full specification — expand
    SystemAn array of electrically driven fans on a welded frame, with guards; a flow conditioner of a honeycomb and screens at the outlet; wind sensors upstream of the test article; a drive and control that shape steady wind and gusts from recipes, with a ramp and a controlled run-down; a mount or a turntable for the test article, with restraints; a supply sized for the peak; and a speed survey of the jet, a restraint and interlock test and documentation before handover
    The One IdeaWind is paid for by the cube.
    Why The CubeThe kinetic power in a stream through a given area goes with the cube of its speed, so doubling the wind takes eight times the power, while the push on a body goes with the square
    Why A Gust Is LimitedA fan rotor has inertia, so the delivered gust is a smoothed copy of the commanded one: it is only as quick as the fans can change speed
    StandardsNo standard is quoted here. The speeds, the gust profiles and the test rules come from the customer and the authority they name, and approval of a test rests with them; none is claimed here. No certification or accreditation is claimed here
    ConfigurationsA steady-wind unit, a gust array, and an array on a turntable
    Scope BoundaryThis page is the wind simulator, which makes wind in the open, steady or gusting, for a test article. It is not a calibration wind tunnel, which makes steady, even air to calibrate instruments (see calibration wind tunnel), not a dust and sand chamber, which blows sand at an article in a closed chamber (see dust and sand test chamber) and not an environmental chamber, which holds a climate (see environmental test chambers). It does not replace a test in real weather, and it does not certify a test article
    StatusNeometrix engineers wind simulators to order, and no delivered wind simulator is claimed.
    04
    Configurations

    One method, three ways to build the simulator.

    The method, the flow conditioner and the speed survey are shared. What changes is how finely the wind can be shaped, and whether the article can be turned.

    Steady-wind unit

    One bank, one wind

    For a test house or a laboratory that needs steady wind at set speeds: one bank of fans on one drive, with a flow conditioner and upstream sensors.

    Gust array

    Groups of fans, shaped wind

    For work that needs gusts and speed that changes across the jet: the fans in groups, each on its own drive, with recipes for gusts and steps.

    Array on a turntable

    Turn the article to the wind

    For an article that must be tried from every side: the same array, with the article on a turntable, so that the wind angle changes without moving the fans.

    And the part that is not equipment at all, yet decides all three: the test article. Its size sets how big the even core of the jet must be, and that sets the array.

    05
    The drawings

    A reference set, drawn as real CAD sheets.

    Two sheets of one reference configuration: the arrangement of a wind simulator with three details, and the sequence of a campaign with the curves that show why wind is paid for by the cube. They show the plan with the jet and its core, the fan array, a fan unit with its flow conditioner, the control loop and the honeycomb. They carry tags and letters only. Every speed, power and gust is fixed by design for the customer's test article.

    Reference drawing sheet one, the arrangement and details of a wind simulator. A plan shows a fan array of three housings, a flow conditioner of a honeycomb and a screen, the spreading edges of the jet and its shrinking even core, a test article on a turntable in the core, two wind sensors upstream of it, and a fence with a door interlock. A front elevation shows the fan array: a welded frame holding six fan units in two rows of three, each in a square housing with a guard, the frame feet, and a drive cabinet with its cable. Detail A shows a fan unit in section: the fan throws its air with a twist, a honeycomb straightens it, a screen evens the speed, and the air leaves straight. Detail B shows the control loop: a recipe, a control, the drives, the fans, the jet, and the sensors upstream that feed back to the control. Detail C shows the honeycomb: hexagonal cells seen end-on with their width, and in section with their length. An item list numbers seven parts. A title block stamped reference configuration, not for construction
    Fig · 04 — Sheet 01, the arrangement: the plan with the jet and its core, the fan array, the fan unit, the control loop and the honeycomb. Reference configuration, letters only.
    Reference drawing sheet two, the sequence and the curves of a wind simulator. A sequence of boxes shows a campaign: survey the jet before the campaign, spin up with staggered starts, hold at the set speed, gust from the recipe, record the sensors and the fan speeds, run down under control and make safe, with an interlock that lets nothing run with the door open. Detail A is a computed plot of power and push against wind speed: power rises with the cube of the speed and push with the square, so the power curve overtakes the push curve above the reference speed. Detail B is a computed plot of a rectangular gust asked for and what two arrays deliver: light rotors follow it closely, heavy rotors round it off and lose its peak. Detail C is a computed plot against distance from the outlet: the even core of the jet shrinks, the ripple from the separate fan jets dies away, a flow conditioner leaves little ripple, and a band marks where the article can sit. A title block stamped reference configuration, not for construction
    Fig · 05 — Sheet 02, the sequence and the curves: the steps of a campaign, the power and the push, the gust against the fans and the jet against the distance. Reference configuration, tags only.

    Every real simulator is drawn for its own test article, its own space and its own test. These sheets are the arrangement and the order of working that a project set starts from. Approval of any drawing rests with the customer and the authority they name; none is claimed here.

    06
    Where it is used

    Wherever an article has to meet the wind, and nobody wants to wait for the weather.

    The common thread is an article that will stand in real wind, a test that has to be the same each time, and a power bill that grows with the cube.

    Drone developers

    Where a small aircraft has to hold its position in a gust, and the gust has to be the same on every flight of the programme.

    Antenna and mast makers

    Where a mast must hold its pointing in wind, and the test has to show how far it moves, and how it recovers.

    Research laboratories

    Where the response of a structure or a sensor to wind is studied, with the speed and the gust held on a recipe.

    Test houses for outdoor equipment

    Where enclosures, covers and instruments are tried in wind before they go outside, and the record has to stand up.

    07
    Watch

    See it in motion.

    A short walkthrough video of the wind simulator.

    08
    FAQ

    Common questions.

    Longer answers, for readers who want the reasoning.

    Q · 01 What does a wind simulator actually do?
    It blows a jet of air over a test article, at a speed that the operator sets, and it can make that speed steady, step it, or gust it. An array of fans on a frame draws air in and pushes it through a flow conditioner, which takes out the swirl and evens the speed. Sensors upstream of the article measure the wind that arrives, and a control compares it with the recipe and adjusts the fans. The article stands in the even core of the jet, on a fixed mount or on a turntable, and is restrained in case the wind takes it. The simulator does not decide what the wind should be. The customer's test does, and the simulator makes it, measures it and records it.
    Q · 02 Why is wind paid for by the cube?
    Because the energy in moving air depends on how much air passes and on how fast it moves, and both grow with the speed. The mass of air through a given area in a second is proportional to the speed, and the energy carried by each part of it is proportional to the square of the speed. So the power in the stream goes with the cube. Doubling the wind speed through the same area takes eight times the power, and halving it takes an eighth. The push of the wind on a body, in contrast, goes only with the square, so doubling the speed gives four times the push. A simulator is therefore cheap to run at low speed and costly at high speed, and its fans, its drives and its supply are sized for the peak that the test needs and no more.
    Q · 03 Why can a gust not be as quick as I like?
    Because a fan has a rotor, and a rotor has inertia. It takes time to spin up and time to slow down, and the air in the jet takes time to follow it. If the control asks for a very short gust, the fans cannot reach the speed before the gust is over, and the gust that arrives is a rounded, smaller copy of the one asked for. A slower gust is copied more faithfully. The remedy is to use light rotors, to group the fans so that some can change while others hold, and to measure the step response of the whole array and keep it in the record. Then the customer knows what the simulator can make, and a recipe that asks for more is shown to be out of reach before the test, not after.
    Q · 04 Why is the jet even only in its core, and what does the flow conditioner do?
    An open jet is not walled in. Its edges meet the still air around it and mix with it, and the mixing spreads inward as the air travels. So the speed is even only in the middle of the jet, and the article has to sit there, close to the outlet and well inside the edges. The flow conditioner works at the other end. A grid of fans makes a grid of separate jets, each with a swirl. A honeycomb of long, narrow cells straightens the swirl, and a fine screen evens the speed by adding a small resistance that is the same everywhere. Both take some pressure, so the fans work a little harder. The speed survey then maps the jet at the place where the article stands, and shows how much of it is even.
    Q · 05 Is this the same as a wind tunnel, a dust and sand chamber or an environmental chamber?
    No, and the differences are worth stating precisely. The calibration wind tunnel page covers a tunnel that makes steady, even air to calibrate instruments. The dust and sand test chamber page covers a closed chamber that blows sand at an article. The environmental test chambers page covers chambers that hold a climate. This page is the simulator that makes wind in the open, steady or gusting, for an article that has to meet the weather. It does not replace any of them, and it does not claim what they claim a second time.
    Q · 06 Has Neometrix built one of these?
    We would rather answer this plainly than let a page imply otherwise. Neometrix engineers wind simulators to order, and no delivered wind simulator is claimed. What stands behind the offer is adjacent: the pages for the calibration wind tunnel, the dust and sand test chamber and the environmental test chambers each describe moving air or controlled conditions around a test article, and each states its own status. The fans, the motors, the drives and the wind sensors are catalogue items, bought in, not invented. What Neometrix engineers is the simulator around them: the array frame, the flow conditioner, the guards and restraints, the control and the gust profiles, the speed survey and the proof. So the honest position is that the simulator is engineered to order, the neighbouring disciplines are in the building, and the first simulator of this exact kind will be built around the customer's own test article rather than taken off a shelf.
    Q · 07 Which standard applies, and what can the simulator not do?
    No standard is quoted on this page. The speeds, the gust profiles and the test rules come from the customer and the authority they name. The simulator makes wind and records what it made. It does not replace a test in real weather, it does not certify a test article, and it is not a way around the rules for the test that apply at the site. This page claims no certification or accreditation. No speed, power, force, size or time figure is printed here, and approval of a test rests with the customer and the authority they name; none is claimed here.
    Q · 08 What do you need from us to quote?
    Six things, and most of them describe your test article and your test rather than the simulator. First, the article: its size, and how it is held. Second, the wind: the top speed, and whether it is steady, stepped or gusting. Third, the gusts: how quick they must be and how often. Fourth, the space: where the simulator stands, and how far the article is from the outlet. Fifth, the supply: what power is available. Sixth, the record: what must be measured and kept. From that we come back with a simulator concept, a proving plan you can check, and a budgetary price.
    09
    Related

    The neighbouring pages, and how they differ from this one.

    Three neighbours: one calibrates instruments, one blows sand, one holds a climate.

    Browse all Neometrix product lines.

    Get a quotation

    Tell us the article,
    and the wind it must meet.

    The projects desk replies within two working days with a simulator concept, a proving plan you can check, and a budgetary quotation. Write to [email protected] or use the form.

    Enquire — wind simulator Capability sheet (PDF) +91 7777 876 876
    ISO 9001 / 14001 ENGINEERED-TO-ORDER CLASS — WIND SIMULATOR DUTY · FAN ARRAY · FLOW CONDITIONER · CONTROL · PROTECTION · SURVEY · PROVE — WIND IS PAID FOR BY THE CUBE. ENGINEERED IN NOIDA · INDIA

    Trending Products

    Share This Page

    Engineered To Standards Used In UK, NATO & U.S. Defence Procurement
    DEF STAN (UK MoD)
    NATO STANAG
    RTCA/EUROCAE DO-160
    MIL-SPEC / MIL-STD
    Address
    E-148, Sector-63, Noida, Delhi-NCR, India
    Phone
    Email
    Working Hours
    8:30 AM – 5:30 PM  ·  Mon – Sat
    move to top arrow